Ce(H_2O)_7Al(OH)_6Mo_6O_(18)·4H_2O: A New One-dimensional Zigzag Chainlike Structure of Anderson Cluster Linked by Cerium Ions

IntroductionPolyoxometalates(POMs),as an important familyof metal oxides,have been receiving considerable at-tention in solid-state materials chemistry due to their di-verse topological properties and potential applications incatalysis,photochemistry,electrochemistry,medicineand magnetism[1,2].Recently,one of the intriguingfields in the polyoxometalate chemistry is to find somenovel subunits and then connect them into one-,two-,even three-dimensional(1-,2-,even3-D)extendednetworks,either thro…     

界面作用对HDPE/POEg/CaCO_3三元复合材料韧性的影响

通过界面改性,制备了以CaCO3为核,马来酸酐接枝乙烯-辛烯共聚物弹性体(POEg)为壳的高密度聚乙烯(HDPEg)/弹性体(POE)/CaCO3的三元复合材料.由于“核-壳”结构的形成,弹性体和CaCO3表现出协同的增韧作用.同未经表面处理的CaCO3复合材料相比,在相同的CaCO3含量的情况下,表面处理的CaCO3由于与弹性体形成更强的界面粘结,使得三元复合材料的“脆-韧”转变发生在较低的弹性体含量.     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

吡啶酰胺在Cd(Ⅱ)存在下的醇解反应及结构表征

X-射线晶体结构分析表明,在90℃的水热条件下,N-(8-喹啉基)吡啶-3-酰胺在Cd²⁺的存在下发生醇解。醇解产物为8-氨基喹啉(HL₁)和吡啶-3-羧乙酯(HL₂),它们与Cd(Ⅱ)配位形成四方锥型化合物。该配合物为单斜晶系,空间群P2₁/c,a=18.1089(1)?,b=8.9986(1)?,c=19.3070(2)?,β=113.085(1     

单分散亲水两性离子交换树脂的制备及其在生物大分子分离中的应用

采用分散聚合与溶胀聚合相结合的方法及高分子溶液致孔技术, 成功地制备了粒径为5.0 μm大孔和超大孔结构的单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂, 并进行了结构表征. 将该树脂经胺化后再与1,3-丙磺酸内酯反应, 得到一种新型的两性离子交换(强阳-强阴型)高效液相色谱填料. 研究了该填料对标准蛋白分离性能及流动相中有机溶剂、 流速和pH值对蛋白保留的影响. 实验结果表明, 在流速为3 mL/min时, 采用线性梯度洗脱, 在4.0 min内可同时快速基线分离3种酸性和2种碱性蛋白.     

在位分散聚合聚甲基丙烯酸甲酯/二氧化硅纳米复合材料研究

应用在位分散聚合方法制备了分散相粒径介于１３０ｎｍ左右的聚甲基丙烯酸甲酯／二氧化硅ＰＭＭＡ／ＳｉＯ２纳米复合材料，并利用ＳＥＭ，ＤＭＡ，ＴＧＡ等手段研究了该体系的性能．结果表明，经表面处理的ＳｉＯ２无机填料在复合材料基体中分散均匀，界面粘结好．ＳｉＯ２填充粒子的用量对基体的热稳定性，动态力学行为，光学行为以及拉伸强度，弹性模量，断裂伸长率等力学性能都有较大影响     

Facile cyclic ammonium salt with the smallest size for high performance electric double layer capacitors

A novel cyclic ammonium salt, N,N-dimethylpyrrolidinium tetrafluoroborate (P₁₁-BF₄), was successfully synthesized for the first time. The smallest cyclic structure of P₁₁-BF₄ induced high solubility and conductivity in PC, which can easier enter the micropores of activated carbon and occupy more surface area during charge/discharge process.     

Preparation and characterization of C16 monolithic columns for capillary electrochromatography

A series of methacrylamide-based C16 monolithic columns were prepared and characterized to determine how their porous structural properties and chromatographic behavior are affected by the percentages of functional monomer, base monomer, and cross-linker in the polymerization solution. Baseline separation of 6 neutral compounds can be readily obtained in an optimized column. Furthermore, the effects of organic additive in the mobile phase, operating voltages, and temperature on retention behaviors and separation efficiencies were also studied. The separation mechanism is also discussed. High column efficiency and good reproducibility indicate that the monolithic columns hold considerable promise.     

超声条件下溶胶-凝胶法制备CaSiO_3∶(Pb,Mn)发光材料的研究

采用溶胶-凝胶法并辅以超声技术制备了CaSiO3∶(Pb,Mn)发光材料,对合成物运用荧光光谱、DTA-TG、XRD、FTIR、TEM等手段进行了表征。研究了制备时的物料配比、超声时间及焙烧温度对样品发光强度的影响,找到了最佳的合成条件。结果表明,所得样品其荧光强度约为高温固相法样品的2倍,平均粒径则降低约300 nm。